A75 dead

  • Thread starter Thread starter alamgarh
  • Start date Start date
A

alamgarh

Guest
I have got one a75 in dead condition here is log from JOKER, Please tell me any body which file i can use to flash it , Please give me any link without RAPIDSHARE,


Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
No Ping Mobile!
Start...
Loading BootsModel(A75)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
SIEMENS A75 lg6 Sw20
Soft FlashID: 0001/220C
FlashID: 0001/227E-220C-2201
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: 4853138A -> PhoneID: 8A135348
OTP IMEI: 358089008185218
HASH: 555FC8925F0A2CD9180FB83FDC46FEE0
Use OTP IMEI: 358089008185218
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
BCORE HASH is equivalent - not change.
Read EEPROM addr: 0xFC0000 size: 0x030000...
EEPROM backup in ".\Backup\A75lg6Sw20_EEPROM_080918114303.bin" file.
Write EEPROM addr: 0xFC0000 size: 0x030000...
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
No Ping Mobile!
 
Ok my set is completey flashed , i have used this file A75_8Mb_010C_FF, But now i cannot see any thing on secreen, just blue display, Please help me.
 
...use Joker-> Service Mode -> 5007 Read
Set first cursor to 55-60 and click on "5007 Write".
Adjust your contrast using "Test Contrast 1"; set up or down first cursor and "5007 Write".
Other methode is to use Contrast tool by Acid...
dagos
BTW, if not working, post the Info log file.
 
SORRY SIR BUT SAME


Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
MobileMode: Service
HWID: 237 (A75)
A75 lg98 Sw20 19.05.05 14:07:25
IMEI: 358089008185218
DisplayID: 0, Unknown or misses
FSN: 4853138A
SW FlashID: 0001/220C
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 4001 mV.
SecurityMode: Factory
Read Contrast...
Display1 contrast: 65, 243
Display2 contrast: 221, 221
Write contrast (55, 221) in block 5007...
Write block 5007 - Ok.
Display1 contrast: 55, 55
Display2 contrast: 221, 221
Test Contrast 55...
Light On...
Test Contrast 55...
Write contrast (58, 142) in block 5007...
Write block 5007 - Ok.
Display1 contrast: 58, 58
Display2 contrast: 142, 142
 
...hehe. this is the other problem...
See in the log file, DisplayID: 0, Unknown or misses.
Maybe your display is damaged, change it. Maybe you have the problem on display connector, verify...
dagos
 
...it is my pleasure
If I requested from the first time the log from "Info", you don't loosed time to try to solve with software...
"Mea culpa"
dagos
 
Back
Top