A70 change lang pack problem

  • Thread starter Thread starter limon
  • Start date Start date
L

limon

Guest
I got A70 Ver.13 and I want to change the lang pack to 04 ( Bulgarian ), but when trying to update ( because I don`t have ver.13 lg04) to ver.14 SWUP I allways got the same answer "Could not ping mobile". I have allready tryied different coms, speed, cables, computers, phones, batteries and settings and still the same. Please help with this - solution, links or just tell me that I`m not the only one with this kind of problem .
Thanks in advance.
 
Don't power off the phone, don't set hook at pre skip and start the update.

Winswup will shut down the phone and start update.
 
Ups!
Chris02 I didn't read carefully, my error is Error on waiting for Ack EOT, swup make pre-check, phone shut down and... error.

I have two phones, both v13. Swup v14. Is it can be important?
 
I had the same problem.

Start Winswup when phone is On.
When programm turn it off, you simply press red button (one short press). The update should start and finish without errors.
If not, start again and after winswup turn Off the phone you should press and hold red button during whole update.

Try, maybe this will work.
////////////////////////////////////////////////////////////

Witch program can communicate with A70, so I can write logos and ringtones??
////////////////////////////////////////////////////////////

Sorry for my bad english
 
Tespoint is already cutted at your phones? Am I right?

Use COM cable, no USB with COm emulation and try it again!
 
I used full flash with joker, thanks for Kakrysa for help, swup don't work, I don't know why...
If somebody need language 91 i can help.
 
Now is cutted, but i tried before with the same result.

I use com cable, I try all day.... Cable is OK, swup is working now with MC60.

I try now under XP, i get Could not Ping Mobile

Please help, my mental health falls.........
 
WinSwup always works! You need only to know how and which cable you need!

You need an SERIAL cable! (Not a USB cable with Com Emulation! It won't work!!!)

- Plugon the cable
- power ON your phone
- Start winswup
- DON't set pre skip
- Start winswup
- winswup will shutdown your phone
- updating starts

If it will not work at the first time try it again!

This will also work at phones with cutted testpoint! Tested many times (of course with A70 too)
 
Same problem i have tried with usb to com with com cable and nothing if i try without hook and with hook allways same, tryed without TP and try to recover TP and nothing. But all of that i have tried after unlock with joker so i don't know if maybe that is a problem.
 
@Chris02 Sorry but on Siemens Bootadapter 2002 are too errors (testpoint not cutted). It seems that you are not 100% right. It is something with this phones.
 
You are not right...
I have 10pcs a70 that don't connect to Winswup, Joker and other tools... No metter COM, USB cable or cutted or no testpoint...
 
Ok here is solution for "Could not ping mobile" error:
The trick is to start update using winswup with your phone turned
OFF!!! Just press "Start" and then quickly power on the phone and pre-
check will succeed! I tested it on A70 v14 and without testpoint
 
Pre check pass but after that error waiting for Flash-code or error on waiting for CMD-Block
 
I'm ight! Belive me!

If your phone are connecting to nothing maybe the small cristal near the jack is damaged!

@b2k
Siemens Bootadapter? The officiel one?

I said use an simple COM Cable!
 
@Chris02
Yes, official one. I'm waiting for normal COM cable to check. Phone connects to Joker. (If it will Swup via ordinary com then it's silly).

OK, phone don't Swup via any cable (tested simply com, usb2com, extreme box, Siemens BootAdapter, ufs2com). Service SWUP and Update Tool see phone, power it off and then nothing. Manual boot doesn't work too.
 
Chris02, you are wrong!
I tried three weeks with on all manners with not original and original siemens COM cable, USB cable, WIN98-PIII 500MHz and WIN XP-AthlonXP2000 with two A70 v13. Something is wrong with this model, phone is off and error. At last I have used joker to change langpack.
 
Problem is only with A70 and error which i get is Error on waiting for Ack EOT
Help please.... I tried everything, origininal COM cable, USB cable any speeds and two systems win98 and XP.
 
Back
Top