A62 phone disabled phone code

  • Thread starter Thread starter astana2007
  • Start date Start date
A

astana2007

Guest
when insert sim,it says hone disabled phone code.
how to remove this code.
I have no box for siemens.
need solution using joker or freia
 
u dont need tp, just choose bootcore bug on joker, go to skey and click recal all keys, phone will be unlocked.
 
Start...
Boots Already loaded!
SIEMENS A62 lg98 Sw07
Soft FlashID: 0001/220C
FlashID: 0001/227E-220C-2201
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: AB9CC9EB -> PhoneID: EBC99CAB
OTP IMEI: 358000001138047
HASH: 0CC25AB08D5DEE70C8E0FDD85F622F13
Use OTP IMEI: 358000001138047
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
BCORE HASH is equivalent - not change.
Read EEPROM addr: 0xFC0000 size: 0x030000...
EEPROM backup in ".\Backup\A62lg98Sw07_EEPROM_090622220343.bin" file.
Write EEPROM addr: 0xFC0000 size: 0x030000...
CRC error in transfer buffer or bad RAM! (Block at 0xFC0000).



what kind of error this is boss???
 
...try with this methode:
-select Type; A60/A62, comport 1 or 2, COM Speed: 115200 and bootcore Typ: BCoreBug
- go to SKey menu and click to "Calc SKey. After calculation click on "Send Skey". If is OK, your phone enter in Factory mode (verify in Service Menu-> Service Mode). If give error, you need to cut one track from the seccond layer (click on TP tab to see picture) and repeat this steps in the "Normal" Boot Typ.
dagos
 
****** Joker Siemens EGOLD Phone Version 0.3.5.2 Test Only opened. ******
****** Tuesday, June 23, 2009, at 12:35:05 ******
Start...
Loading BootsModel(A60)...
Sending StartBoot Ok.
Error: MainBoot answer code 0x
 
****** Joker Siemens EGOLD Phone Version 0.3.5.2 Test Only opened. ******
****** Tuesday, June 23, 2009, at 12:29:17 ******
Start...
Loading BootsModel(A60)...
Sending StartBoot Ok.
Error: MainBoot answer code 0x
 
...sems to be damaged bootcore area. After calculation, send this key to phone? If give to you error, you need to fullflash your phone using the good fullflash file and flash it including bootcore area (and activate option ReCalc keys).
dagos
 
thnx boss for replying.
but I have no flash file
and dont know how to flash it.
please provide me.(File+operating method)
 
OK,
download the following files:
A62 firmware 06 language pack 98 (multi flash files):
http://www.4shared.com/file/113880507/7a5030b4/a62_v06_bootcore.html

and/or

A62 firmware 07 language pack 91 (single flash file - use only the 8MB fullflash):
http://www.4shared.com/file/96828339/2ef500b8/A62_07_AMD.html

I propouse to use the last Joker software:
http://www.4shared.com/file/88732412/b140adf5/Joker_0356c.html

So, open Joker, select Type; A60/A62, comport 1 or 2, COM Speed: 115200 and bootcore Typ: Normal. Go to flash menu, select FullFlash, check only ReCalc Keys and click to Write. Select fullflash file (file with 8MB dimension) and wait to finish.
I propouse to try first to flash only bootcore area (to not loose your stored files). Use flash file "A62_80-01_BC_bcore.bin" from the "a62_v06_bootcore.rar" archive. Set in the Flash menu "BCORE" option and remain checked only ReCalc Keys option. Wait to finish and enter in Service Mode to see if is OK (phone status Factory Mode). After try to start normarly your phone. If not working, remain to fullflash everything (Bootcore, EEprom,Language pack) using 8MB fullflash file.
dagos
 
after u have done tp then recalulate skey it will work, tested by me several times. good luck
 
...only if the bootcore area or begining of EEprom is correctly, if not, Joker give somme read/write error message. Try to write b*****t in the bootcore or to erase blocks from EEprom and calculate SKEY after
dagos
 
So, open Joker, select Type; A60/A62, comport 1 or 2, COM Speed: 115200 and bootcore Typ: Normal. Go to flash menu, select FullFlash, check only ReCalc Keys and click to Write. Select fullflash file (file with 8MB dimension) and wait to finish.

I act upon on above instruction.
but after that such logs received in the end.




Error: MainBoot answer code 0x
 
...this message apeair if you not have cut track (realyse testpoint). Verify again testpoint.
dagos
 
Back
Top