a60 dead, help please...

  • Thread starter Thread starter pchelpsi
  • Start date Start date
P

pchelpsi

Guest
Hello to everyone!

I have a problem. I upload eeprom and firmware to my Siemens a60 and now it's dead. When I press the red button to turn it ON, nothing happend. I want to flash it again with the rigt eeprom and firmware, but cannot, becouse when The Frei ask me to turn ON the phone, phone not response. It is totaly dead. Any suggestion what I should do? Just to let you know, I did not cut anything.

Thanks in advance for any help or suggestion.

Is there any other way to turn it ON without press a button?

Regards,
Dejan
 
Thanks for a quick replay.

The problem is that SST ask me to turn ON the phone, but phone won't turn ON anymore. When I push the button on the phon to Turn it ON, phone won't response.

What now?

Is there any other way to get him to turn ON, like a testpoint or something.
Regards,
Dejan
 
1. no boot= testpoint
2. bootcore - daead

i flash A60,C60 . . . . ALL siemens /1 . . . . . .. 8x with respect to POWER

flash,flash,flash .....
 
if first time your phone was flash with no any problem i don't know why no power in freia or sst any more... so is not software problem i guess. test poit is ok? what about battery, is charged, u put corectly in phone? com port in programme are also good chose? chek phone connector and cable...
 
Batery is full...
Before I upload a new firmware, freia work OK, also the button on the phone work OK, when I push the button, phone response, etc...
After I upload firmware, phone is dead and no response.
I did not made any testpoint, but if you think that will help, I can do that.

So, what should I do?

Is there any program that not require to turn ON the phone, when I want to flash it?

Regards,
Dejan
 
i can't explain what is wrong... but for A60 i think for flashing u must do test point, but anyway...phone must power on, without test point just boot file is not accepted, but phone must power and i dont think what another software exist for siemens who not require power phone...
 
OK, I'll try with a test point and post a result.

In the mean time, I need to ask one more thing. Is there possible to cheat the phone and turn it ON by another way thank with pressing on the button?
I mean like conecting something together directly on the phone?

Thanks
 
Did you do any backup, if not check the system for any backup and write back to phone, it will wake up the phone.
 
I guess you did not read all the posts. I have eeprom file, I have also flash file, and a bootcore file, I have all I need, BUT...

THE PROBLEM IS THAT PHONE WONT TURN ON ANYMORE!!

also if i had a backup, haw can i upload to the phone, if phone not respone when I push the TURN ON button???

Do you understand now? I know how to fix the phon, if the phone response when i pust TURN ON button. I cannot fix it, becouse its totally dead.

Now, the first step that I need to do is to get phone response again on the button ON/OFF!
 
i had this probem in more siemens mobiles i just changed the flash ic and the phones were alive again
 
Very interesting replies I have read here

Sorry for my late answer,

@ pchelpsi

Of course you had to cut TP, then phone would response of FREIA/SST`s request !


Regards,
B
 
my a 60 power on after flash with cut test point
now phone is ok but lcd fade
i repair with joker
but after pressing any keys lcd again comes to fade
test point still cut
any solution plz
 
Thanks to anyone who help. My phone is alive again, I just made a testpoint and flash again with and eeprom and flash file and now phone working perfectly.

Thanks
 
use joker:-

1. full flash phone
2. recalc skeys
3. set contrast

using sst:-

1. full flash phone
2. hit repair
3. Unlock
4. set contrast
 
pls everybody should help me i have flashed siemens a60, c60, c55, cf62 but after flashing them time they failed to power on
 
Back
Top