A55 Siemens dead wont connect with UFS3

  • Thread starter Thread starter sof940
  • Start date Start date
S

sof940

Guest
hi all
my siemens is dead suddenly, i've tried to flash it with My original Tornado+HWK with freia software (see photo below) but it won't connect with box , please need help and godd files for it , thanks
[email protected]
 
FREIA - Engine build 16, Frontend build 11
Thanks goes out for the following:
Maxim, Rolis, Sergey, PapaJoe, Lead,
TheWizard, Jozso (for hardware and cable
support and of course beta testing),
Nico, Pinker, Tom, Crew
and all the others who supports ...
COMM_LoadBoots : selected phone family is 8
TTY_OpenCOMPort : opening UFS2
TTY_OpenCOMPort : UFxBoot V2.2 (c) SarasSoft 2003., id 62 CF
TTY_OpenCOMPort : UFS_USB V2.6 (c) SarasSoft 2005.
TTY_OpenCOMPort : serial xxxxxxxxx
TTY_OpenCOMPort : License is valid
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is not powered on

Same Problem with me.
well
I have tried all speeds and boot type.
any Solution?
BR.
 
@ Afzaal

Can phone be powered on ? Can you check firmware version ? Or is it dead ?
Did u make testpoint ?
 
thanks for quick reply
Actually when i get this fone it was showing Wrong Software for a while and Turn off.
so i was not able to check its software ver.
1st i try to unlock it with friea bcoz i have notice many times it workout for such error.
but i get the error
"COMM_IsBootRunning : bootcode does not seem to be running"
so try to Flash it with Friea but same error
afterwards i try free software
"All Siemens free for all (nasirian Mobile)
it occured no problem and flashed fone
after flashing when i try to switch ON nothing happened.
i used this file "Siemens a55 lg3 v8 - 00fa0000.fls"
now phone cant Power On but Friea is showing same Log.
Now a friend of mine suggested to flash it with Joker.
do u think this might be handy?
BR.
 
Flash file of Joker downloading in Progress

for now heres Friea Log

FREIA - Engine build 16, Frontend build 11
Thanks goes out for the following:
Maxim, Rolis, Sergey, PapaJoe, Lead,
TheWizard, Jozso (for hardware and cable
support and of course beta testing),
Nico, Pinker, Tom, Crew
and all the others who supports ...
COMM_LoadBoots : selected phone family is 8
TTY_OpenCOMPort : opening UFS2
TTY_OpenCOMPort : UFxBoot V2.2 (c) SarasSoft 2003., id 62 CF
TTY_OpenCOMPort : UFS_USB V2.6 (c) SarasSoft 2005.
TTY_OpenCOMPort : serial xxxxxxxxx
TTY_OpenCOMPort : License is valid
TTY_OpenCOMPort : baudrate is 115200
COMM_IsBootRunning : bootcode does not seem to be running (don't you think something is fishy here?
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is not powered on
TTY_CloseCOMPort : Closing UFS2

Something Handy ?
Regards...
 
I mean log of software joker : http://papuas.allsiemens.com/JokerV0343.rar

I already read Freia log !!
 
Heres Joker Log

Open file "C:\Documents and Settings\Afzaal\Desktop\Joker Flash Files\A55_07\A55_07\A55_80-80_FF.bin" for write in Flash.
Use file FullFlash (offset block in file = 0x200000).
FullFlash file info:
FlashID: 002C/0017
SIEMENS A55 Sw07 lg1
RealLgPack: lg1
Start...
Loading BootsModel(A55)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Warning: HASH data error!
SIEMENS A55 lg1 Sw09
Soft FlashID: 002C/0017
FlashID: 002C/0017
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 64, Size 128Kb
Start EEPROM segments at addres 0xFA0000
FSN: AE7E7394 -> PhoneID: 94737EAE
OTP IMEI: 351855009752074
HASH: A09B958A785C41120100000000000000
Read EEP0067 block (ver00), size 20 bytes - Ok.
Read EEP0076 block (ver00), size 10 bytes - Ok.
Read EEP5005 block (ver00), size 64 bytes - Ok.
Read EEP5007 block (ver00), size 10 bytes - Ok.
Read EEP5008 block (ver00), size 224 bytes - Ok.
Read EEP5009 block (ver00), size 10 bytes - Ok.
Read EEP5012 block (ver00), size 12 bytes - Ok.
Read EEP5077 block (ver00), size 232 bytes - Ok.
Read EEP5093 block (ver00), size 32 bytes - Ok.
Read EEP5121 block (ver00), size 56 bytes - Ok.
Read EEP5122 block (ver00), size 6 bytes - Ok.
Read EEP5123 block (ver00), size 14 bytes - Ok.
EEPROM blocks is written in ".\Backup\A55lg1Sw09_Backup060424161755.eep" file.
Data file "C:\Documents and Settings\Afzaal\Desktop\Joker Flash Files\A55_07\A55_07\A55_80-80_FF.bin".
Write Flash addr: 0xA00000 size: 0x040000 - Ok.

But Fone is still Dead
Regards.
 
When i try to Select Flash file for Joker i Get this Error
there are 6 files listed for Joker Flash
A55_80-02_BC.bin
A55_80-80_FF.bin
A55_88-04_T9.bin
A55_DA-06_LG.bin
A55_FA-06_EE.bin
A55_M.bin
Above Log is for this File A55_80-80_FF.bin
Why its giving
Warning: HASH data error!
Any help?
BR.
 
Coz you have 4Mb file size Fullflash, and phone has 8Mb Flash chip

I`m uploading a Magic file for you now (You`ll read txt in archive to undertand why it is "magic" )
 
evil-hackers.com/BB-gsm/A5x_4-8Mb_MAGIC_FF.rar

After flashing use "Recalc all keys" !


Regards,
B
 
Downloaded thrice but Bad Archive
can u upload it some where else
Like megauploads
BR.
 
Here u can See the magic File Log with Joker...

Open file "C:\Documents and Settings\Afzaal\Desktop\Joker Flash Files\A5x_4-8Mb_MAGIC_FF\A5x_MAGIC_FF.bin" for write in Flash.
Start...
Boots terminated!
Cancel.
Start...
Loading BootsModel(A55)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Warning: HASH data error!
SIEMENS A52 lg1 Sw05
Soft FlashID: 0089/0016
FlashID: 002C/0017
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 64, Size 128Kb
Start EEPROM segments at addres 0xFA0000
FSN: AE7E7394 -> PhoneID: 94737EAE
OTP IMEI: 351855009752074
Warning: The software of the telephone does not correspond to FlashID!
HASH: A09B958A785C41120100000000000000
Calc Skey Error: HASH data error!
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
No Ping Mobile!
Open file "C:\Documents and Settings\Afzaal\Desktop\Joker Flash Files\A5x_4-8Mb_MAGIC_FF\A5x_MAGIC_FF.bin" for write in Flash.
Start...
Loading BootsModel(A55)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Warning: HASH data error!
SIEMENS A52 lg1 Sw05
Soft FlashID: 0089/0016
FlashID: 002C/0017
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 64, Size 128Kb
Start EEPROM segments at addres 0xFA0000
FSN: AE7E7394 -> PhoneID: 94737EAE
OTP IMEI: 351855009752074
Warning: The software of the telephone does not correspond to FlashID!
HASH: A09B958A785C41120100000000000000
Read EEP0067 block (ver00), size 20 bytes - Ok.
Read EEP0076 block (ver00), size 10 bytes - Ok.
Read EEP5005 block (ver00), size 64 bytes - Ok.
Read EEP5007 block (ver00), size 10 bytes - Ok.
Read EEP5008 block (ver00), size 224 bytes - Ok.
Read EEP5009 block (ver00), size 10 bytes - Ok.
Read EEP5012 block (ver00), size 12 bytes - Ok.
Read EEP5077 block (ver00), size 232 bytes - Ok.
Read EEP5093 block (ver00), size 32 bytes - Ok.
Read EEP5121 block (ver00), size 56 bytes - Ok.
Read EEP5122 block (ver00), size 6 bytes - Ok.
Read EEP5123 block (ver00), size 14 bytes - Ok.
EEPROM blocks is written in ".\Backup\A52lg1Sw05_Backup060424194407.eep" file.
Data file "C:\Documents and Settings\Afzaal\Desktop\Joker Flash Files\A5x_4-8Mb_MAGIC_FF\A5x_MAGIC_FF.bin".
Write Flash addr: 0x800000 size: 0x400000 - Ok.

-------------------------------------------------

and heres Recalc Result...

Loading BootsModel(A55)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Warning: HASH data error!
SIEMENS A52 lg1 Sw05
Soft FlashID: 0089/0016
FlashID: 002C/0017
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 64, Size 128Kb
Start EEPROM segments at addres 0xBA0000
Warning: Not valid addres Start EEPROM in set phone model!
FSN: AE7E7394 -> PhoneID: 94737EAE
OTP IMEI: 351855009752074
Warning: The software of the telephone does not correspond to FlashID!
HASH: A09B958A785C41120100000000000000
Use OTP IMEI: 351855009752074
Error: Not valid addres EELITE in set phone model!


What Now

Regards
 
Power on it

I think it must be ok now ! Or else there is also second magic file but 8Mb


Regards,
B
 
OK Thanks for time and Files...
I am Gona download them and will Post Result...
Regards
 
Back
Top