A50 died after freia using

  • Thread starter Thread starter Hetfield
  • Start date Start date
H

Hetfield

Guest
hi

i was using freia, but, after copying the bootcore from an A50 to another,
this is "died". copy was successful, but i didn't copy eeprom and firmware, so maybe this is the problem...

it doesn't start no more. someone told me to build a autoijniction cable, but i can't.
instead i read somewhere i can use testpoint solution.
can you explain me how or give me a datailed link for this?

thanks
 
this a vey easy man the test point is not too complicated ist alitlle soldering
try to see www.unlockeasy.com
the descragas section siemens so download the test point file
wbr
wissem
 
I think you can solve your problem using Freia unlock use "original IMEI" and the phone will work again. But, if you need testpoint see http://people.itu.int/~emartine/Testpoints.htm
 
no i don't wanna buy a new toolkit.

@ednacell: the problem is that freia doesn't work no more, cause when i press the on button, nothing happens.

i'll take a look to the testpoint solution posted here. thnx so much.
 
i did the testpoint solution...

ehi it's so simple, only a link to ground!
ok...now i start freia...but same as before, dead.

i repeat: i did something weird with bootcore...and i wanna reflash it again...am i on the right way?
 
freia display "not powered on"

but the testpoint link is not very good...i'll try to do a better one.

my cell phone situation:
firmware: should be a v7 fubu
eeprom: relative from the v7 fubu
bootcore: the v7 fubu one has been overwritten by a v12 one.

this is the problem. the v12 can't boot nothing.
now i just wanna know: testpoint will let me just poweron the phone, in order to flash a v12 (or v7) fubu completly?
considering the facts...i only need a stupid signal "on" to overwrite memory.
hardware is new and works good ((

will testpoint sent this signal?
any other solution?

i'm pretty desperate, it "was" not my phone ((
 
you're so kind
however i'm pretty sure my link (a paper clip) was not so good.

tomorrow i'll take it a friend and i'll try again )
thx, i'm optimist now.
 
ok...now the testpoint is applied. for real.

but nothing works!
i feria i try to do something, it asks for power, and it doesn't get powered.
battery is charged, i checked with another phone.

what can i do?
 
If the "phone turn on" with the cable connected and freia not see. And you have select the right serial com port in freia, it can one of three things that are bad, you serial is bad or connecter on the phone is bad or the configuration setting in freia are wrong. You need to play with the configuration setting e.g., Boot type "boot bug" etc.. Keep cool you will find the problem.
 
the config works, cause i tried with a C45 phone and it works immediatly.

i played a lot with config, now way
i always ask for help only when i can't do anything alone (

waiting for tricks!
 
Back
Top