A50 dead, need your help

  • Thread starter Thread starter The Magpies
  • Start date Start date
T

The Magpies

Guest
Have read some instructions on how to repair it, so I have flashed new version, please let me know what next as its not too clear for me.

Regards
 
i tried this solution and it's working 100%

1- fullflash the phone with the full_flash which comes with the files.
2- write the eeprom
3- write the hdd data area
4- then in the imei_ing tab, first read the Original Imei(Flash Chip)
In this case the fullflash option should be enabled by the tab Flashing
5- copy the imei and then read the Actual Imei in the tab ImeIing
when you read it, it is another imei,
6- paste the copied imei and in the Flashing Tab choose eeprom flashing or reading
7- come back to the tab ImeiIng and click the Write Imei.
wait for about 5 min
8- don't stop the option!!!! just close the program!
you will see that the program says writing Imei!!!
and that is it!
the telfoon i alive!!!
 
I read this on other forum m8, but, when it says, write hdd and full flash with comes with files and all that, which progy and files we talking about.

Thanks for your response anyway.

Regards
 
Thanks Vitas for your reply, Do I have to download the eeprom and language pack to write them to the phone??? or can I read them from a phone with Jordik and write them with Wizard??

Regards
 
@Magpies,

Let me ask you,

Does phone unlock with and shows IMEI even as is dead? (with testpoint) if yes remove testpoint., then winswup full flash into it, and phone will be alive.

If phone gives error when you try to winswup, like bootcode error, you ll have to write boot code with a50/c55 wizard software and then try winswup again.

Try it and let me know
 
Will try that and let you know, thanks for your help.

Edit....
I did what you suggested above and get this error with SWUP
"Error on waiting for Ack EOT"

Now I am puzzeled...

Regards
 
Back
Top