[Jezan] decided to introduce his son to electronics by building a small crystal radio. These crystal sets have been around for a long time, and make for a great beginner electronics project, but some of the required parts are a little hard to come by. The most difficult to source part for these radios is a variable capacitor, and not finding one in his parts bin, [Jezan] decided to make his own.
This variable capacitor comes directly from a piece of 1.5 mm thick aluminum sheet. Instead of fancy CNC machines, power tools, or even a pair of tin snips, [Jezan] cut the rotors and stators for his variable capacitors with a pair of scissors. The center hole was punched out with a piece of sharpened pipe, and all the pieces were filed down and sanded for a perfect finish.
Considering the variable caps you can get your hands on are either rare or very old, this looks like a great afternoon project for the budding electronics wizard or radio enthusiast. [Jezan]‘s craftsmanship is incredible as well and the finished part looks like it came off an assembly line.
Filed under: hardware
