F
Francise M
Guest
OK. so my car has been driving good for a long time and I have done all the maintenance and record. however, I am modifying my CRV to make it to it best. any way. I drop to school and I drop back home. everything seem to be OK until I drove to work it was ok too than 4 hours later I decided to go eat lunch out with a friend of mine because I invited her. any way, When I turn the car into on position, the Maintenance requirement light came out, it flashes 10 than it disappear. so I turn it off and turn it on again and it flashes 10 times again so I turn it off than I start the car than again it the Maint. Req. flashes 10 times again than it disappear again just like before. so I check the cluster instrument and everything seem to be fine. No engine light on, ABS and SRS it fine even the Brakes a fine it still new but the only thing was on when I turn the key in ignition to on position was the oil and battery light. so that is normal like it said on the manual. so I don't know what seem to be the problem. it drives fine and I don't hear anything unusual. he is what I think might cause the problem. I install a cold air intake and its been 9 months now and second is that I install a Viper 721XY asd I just install an Tenable catback exhaust and it's been a month and half now. also my Drive seat it moves. its not steady, I tired to get it fix the last time I had my 50000 mile maintenance requirement. I though it could be the seat but the SRS is fine it's not flashing. so that's all I know that might cause the maintenance requirement light comes out but I'm not sure. the other thing I notice since I install the exhaust. I been smelling something inside the car like rubber, gas or the smell of exhaust when I drive or accelerate or when I do 65 and 75 mph. so that is all I know. I'm thinking of taking it to my nearest Honda Dealer on Saturday but I know their going to charge me a lot. so I will take to Auto Zone to run a test first and find out what's the problem. so if you have any idea of what seem to make my maintenance requirement light flashes 10 time please let me know and what can I do or how to fix it. thank you.