To bleed your brakes, do this.
Make sure the master cylinder is full and keep checking it during the operation to make sure it doesnt get low.
Have a helper sit in the drivers seat and pump the brake pedal until the pedal is hard then hold pressure on the pedal.
Open the bleeder valve for a second or so (dont keep it open past when the pedal goes to the floor), fluid and any air will be ejected quickly. Repeat this process at each wheel until you get straight fluid with no air. To do the entire system (recomended), Start with the wheel furthest from the master and work to the wheel closest. On your car do the right rear, left rear, right front and left front in that order.
best of Luck !
