1930 ford model a trouble pleas help?

B

big girl

New member
hey ppl i have a problem my 1930 ford model a wont start the battery is fully charged and the fuse on the starter is not blown what could it be what do i need to check any help is good thank you and when you try to start it and push the button is does nothing it does not even try or even turn the only thing that happens in the amp meter moves a little bit help o and it is 6 volt
 
Need a volt meter and an assistant. Check for voltage at the main wire connection on the starter while pressing start button. If voltage is there the starter is bad. If no voltage, check for power at the switch If you have power at all the positive current locations then it is definitely a ground wire issue. Start at battery and trace to the frame ground and then to the engine ground.

Be very specific about any wires you have to replace as incorrect wires WILL detract value of vehicle.

I think we have spoken before and as always you can e-mail me through my avatar if more info is needed.

Alex
 
Back
Top